Welcome to T-Line Technology Co.,LTD.

ADVICE LINE
0527-80298006
Contact us
Hotline
0527-80298006
Address:Jiangsu Siyang economic development zone East Beijing Road No. 101
LEAKING inspector
View: Pubdate:2022-02-21

Detailed introduction

The inspection machine adopts two independent detection systems, which are used for detecting different forms of leakage of the aluminum film of the product, such as alumium film not-tight seal, breakage, and cap loose. The capacity is up to 10,000 barrels per hour.



Double X-ray liquid level detection system: two X-rays are used to detect the product, and the control center compares and analyzes the two groups of values before and after extrusion, and makes a judgment. When the difference between the two groups of values exceeds the predetermined range, the control center transmits the signal to the rejector, and the unqualified product is eliminated by the rejector.


The double-pressure detection system is characterized in that the pressure and the two contact pressure sensor technologies are used for detecting, and when the product passes through the detection machine, the two-side belt extrusion products of the machine are detected, and the pressure values of the two pressure sensors after the belt are transmitted in real time, the two groups of pressure values are compared and analyzed by the control center, and the judgment is made. When the difference between the two sets of pressure data exceeds a predetermined numerical range, the control center transmits the signal to the rejector, and the unqualified product is rejected by the rejector.


 

The device can detect the condition that the sealing of the aluminum film is not tight, the false seal or the sealing cover is not tight, the barrel body is damaged, the capacity is insufficient, and so on.


Scan the qr codeClose
the qr code